1975 John Deere 526 Snowblower 26 Auger Axle Flytes 726 826 Useable! OEM

Here's a 26" auger axle for a vintage John Deere 526 snowblower in good usable shape.  This should fit many other Deere 726, 826  models as well, so check your application.  The axle shows normal wear and still worked well on the blower.   Still spins out round.  The shear pin holes aren't hogged out and the flytes slid off the axle well.   The brass gear key detent is in good shape and holds tight.  There is some typical surface rust or staining as is common on these--but doesn't impede performance.  Includes both shear OEM pins.  This is a good solid unit and still worked well on the blower.   Will need to be thoroughly cleaned and lubed prior to installation.  The Deere 526 stuff is getting harder and harder to find, so here is your unit for that hard working Deere snow blower or resto project.  Also, please thoroughly clean and re-lube for installation.   Please look at the pictures.  Ask any questions that you might have.  Paypal payment due within 48 hrs of auction ending.  Carefully packaged and quickly shipped.  Thanks for looking.