john deere x330 vs x350 lawn tractor comparison
 John Deere X330 Lawn Tractor with 42-inch Deck | John Deere X350-42A (2018) Lawn Tractor with 42-inch Deck | |
ENGINE | ||
|---|---|---|
| Power | 20 hp 14.9 kW | 18.5 hp 13.8 kW |
| Displacement | 44.2 cu in. 724 cc | 36.8 cu in. 603 cc |
| Manufacturer/model | 44J6 Cyclonic | FS600V |
| Type | Overhead valve, full-pressure lube, oil filter | Overhead valve, full-pressure lube, oil filter |
| Cylinders | V-twin, cast-iron liners | V-twin, cast-iron liners |
| Governor | Mechanical | Mechanical |
| Choke/speed control | Separate levers, automatic choke return | Separate levers, automatic choke return |
| Cooling method | Air | Air |
| Air cleaner | Dry, replaceable with foam precleaner | Dry, replaceable with foam precleaner |
| Oil drain | No tools drain hose | No tools |
FUEL SYSTEM | ||
| Type | Gasoline | Gasoline |
| Fuel delivery | Pulse pump, carburetor | Pulse pump, carburetor |
| Fuel gauge | Gauge on dash | Gauge on dash |
| Fuel tank location | Rear | Rear |
| Fuel fill opening | On left fender, 3 in. 7.6 cm | On left fender, 3 in. 7.6 cm |
| Fuel tank capacity | 3.3 U.S. gal. 12.5 L | 3.3 U.S. gal. 12.5 L |
ELECTRICAL SYSTEM | ||
| Battery | 12 V 340 CCA | 12 V 340 CCA |
| Charging system | Flywheel alternator, regulated, 14 amp | Flywheel alternator, regulated, 15 amp |
| Engine starter | Bendix | Bendix |
| Hourmeter | Yes | Yes |
| Headlights | Two standard, incandescent, 27 W | Two standard, incandescent, 27 W |
| Taillights or reflector | No | No |
| Backup lights | No | No |
| Rear work lights | No | No |
| 12-V outlet | Optional | Optional |
TRANSAXLE | ||
| Type | K46 hydrostatic integrated with transaxle | K46 hydrostatic integrated with transaxle |
| Control | Twin Touch pedals | Twin Touch pedals |
| Cruise control | Yes, button on dash | Yes, button on dash |
| Oil cooler | Fins and fan on transaxle | Fins and fan on transaxle |
| Oil filter | Internal, not replaceable | Internal, not replaceable |
| Differential lock | No | No |
| Forward speed | 0-5.5 mph 0-8.9 km/h | 0-5.5 mph 0-8.9 km/h |
| Reverse speed | 0-4 mph 0-6.4 km/h | 0-4 mph 0-6.4 km/h |
| Brakes | Internal wet disc | Internal wet disc |
CHASSIS | ||
| Frame | Welded heavy-duty | Welded heavy-duty |
| Primer/paint | E-coat/powder | E-coat/powder |
| Weight bracket | Standard rear, optional front | Standard rear, optional front |
| Receiver hitch | No | No |
| Front axle | Cast iron front axle, front wheel ball bearings | Cast iron front axle, front wheel ball bearings |
| Spindle bushings | No | No |
| Front tires | 15x6-6 | 15x6-6 |
| Rear tires | 20x10-8 | 20x10-8 |
| Hood material | Molded-in color hood material reduces sound, will not rust or dent | Molded-in color hood material reduces sound, will not rust or dent |
| Fender deck material | Stamped steel | Stamped steel |
| Floor mats | Sure-grip rubber | Sure-grip rubber |
| Storage | On fender and under seat | On fender and under seat |
| Service interval decal | Yes | Yes |
| Fender handles/grips | No | No |
| Cup holder | Yes | Yes |
| Equipment mounting | Yes, heavy duty | Yes, heavy duty |
STEERING | ||
| Type | Manual, sector and pinion | Manual, sector and pinion |
| Four-wheel steer | Not available on this model | |
| Steering wheel | Large, 14 in. 35.6 cm | Large, 14 in. 35.6 cm |
| Tilt steering wheel | No | No |
| Turning radius | 16 in. 40.6 cm | 16 in. 40.6 cm |
| Uncut circle radius | 26 in. 66 cm | 26 in. 66 cm |
SEAT | ||
| Type | Open-back design with grasp | Open-back design with grasp |
| Seat back height | 15 in. 38.1 cm | 15 in. 38.1 cm |
| Armrests | No | No |
| Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm | While seated, slide rail, 14-position, 7 in. 17.8 cm |
| Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
LIFT SYSTEM | ||
| Type | Foot pedal with optional adjustable spring assist kit | Foot pedal with optional adjustable spring assist kit |
| Hydraulic outlets | No | No |
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm | 13 positions, 1-4 in. 2.5-10.2 cm |
| Cut height increments | 0.25 in. 0.64 cm | 0.25 in. 0.64 cm |
| Preset cut height | Yes | Yes |
MOWER DECK | ||
| Type | Side discharge | Side discharge |
| Cutting width | 42 in. 107 cm | 42 in. 107 cm |
| Construction | Stamped steel deck shell | Stamped steel deck shell |
| Mower deck material | 12 gauge 0.105 in. 2.7 mm | 12 gauge 0.105 in. 2.7 mm |
| Mower wash port | Yes | Yes |
| Mower drive system | Electric power take-off (PTO) clutch, in-line belt | Electric power take-off (PTO) clutch, in-line belt |
| Mower wheels | Two | Two |
| Mower wheel adjustment | Four-position, tool required | Four-position, tool required |
| Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge | Exact Adjust ports and onboard deck-leveling gauge |
MOWER ATTACHABILITY | ||
| Type | Slide under tractor | Slide under tractor |
| Front draft arms | Attached with spring pins at two points | Attached with spring pins at two points |
| Rear draft arms | Two pins and spring clips | Two pins and spring clips |
| Mower wheels rotate | No | |
| Drive system | Single belt | |
SAFETY | ||
| Meets ANSI standard | Yes | Yes |
| Meets OPEI standard | Yes | Yes |
| Backup protection | Reverse Implement Option (RIO) | Reverse Implement Option (RIO) |
| Safety video | Yes | Yes |
BUYER'S NOTES | ||
| Notes | One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent Durable E-coat primer and powder-paint finish | One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent Durable E-coat primer and powder-paint finish |
| Warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
OPTIONAL EQUIPMENT | ||
| Mowers | 42A (standard) | 42A (standard) |
| Rear bagger | 2-bag, 7 bu 247 L | 2-bag, 7 bu 247 L |
| Mulching system | Yes, MulchControl | Yes, MulchControl |
| Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
| Front blade | 44 in. 111.8 cm | 44 in. 111.8 cm |
| Snow blower | Two-stage, 44 in. 111.8 cm | Two-stage, 44 in. 111.8 cm |
| Sprayer | Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal. | Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal. |
| Spreader | Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted 125 lb | Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted, 125 lb |
| Front bumper | Styled bumper option | Styled bumper option |
| Brush guard | Yes | Yes |
| Weather protection | Weather enclosure | Weather enclosure |
| Sun canopy | Yes | Yes |
| Bucket holder | Yes, double bucket | Yes, double bucket |
| Grass striping | Lawn striping kit | Lawn striping kit |
| Tractor shovel | 40 in. 101.6 cm | 40 in. 101.6 cm |
| Tow-behind tools | 16 | 16 |
DIMENSIONS | ||
| Height | 47 in. 120 cm | 47 in. 120 cm |
| Overall length | 72 in. 182.9 cm | 72 in. 182.9 cm |
| Wheelbase | 49.4 in. 125.5 cm | 49.4 in. 125.5 cm |
| Width with mower | 50.5 in. 128 cm | 50.5 in. 128 cm |
| Width with mower (deflector raised for storage) | 50.5 in. 128 cm | 50.5 in. 128 cm |
| Width without mower | 38 in. 96.5 cm | 38 in. 96.5 cm |
| Weight | Mower, no fuel, 542 lb 246 kg | Mower, no fuel, 543 lb 246 kg |
X330 Vs X350 Lawn Tractor Comparison sale
X330 Vs X350 Lawn Tractor Comparison video
Reviews
- john deere riding mowers reviewsJan 25 2020
Latest Posts
- lx280 lawn tractor$76.47
- lx173 lawn tractor$13.85